Sanding Fiberglassed Hull – Part 1

Posted by Zachary Wiest in Epoxy, Fiberglass, Sanding, Tools

I have reached what I believe will be one of the most time-consuming steps in the build.  I started sanding down the epoxy-covered fiberglass hull.  The goal is to get it slippery smooth through 220 grit prior to one last coat of epoxy.  After that it’ll be primer and paint.  As I learned today, there is no quick way to do it.  After three hours of work I completed the bottom panel and am about 80% through port panel #1.  It’ll take quite a few days for me to finish it up.

Time Spent: 3.0 Hours

Total Time In Build: 54.5 Hours

Leave a Reply

the rank way