Fixing My Fiberglass Mishap, Part 2

Posted by Zachary Wiest in Epoxy, Fiberglass, Mishaps

I was finally able to re-fiberglass the sanded out bad fiberglass on the hull tonight.  The process was identical to the first time.  I laid out the fiberglass, cut to size.  Then I used the squeegee to spread the epoxy into the fiberglass weave.  You can barely tell that anything was wrong.  When it all gets sanded smooth, you definitely won’t be able to tell.

Time Spent: 1.0 Hours

Total Time In Build: 45.5 Hours

Leave a Reply